Seaport Aquamarine 2x10 Polished Ceramic Tile

Roll over image to zoom

Add Sample to Cart
Seaport Aquamarine 2x10 Polished Ceramic Tile
/ sq. ft.
As Low as $5.86 per sq. ft.
  • Buy 19 for $7.35 per sq. ft. and save 9%
  • Buy 56 for $5.86 per sq. ft. and save 27%
/ box

Covers 5.38 sq. ft.

Enter sq. ft.
How much do I need?

Availability: In stock

Ships in 1-2 business days $10 Flat Rate Shipping
365 day returns
Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need units. We recommend that you order units (10% extra) to cover cuts and future repairs.

Try a sample for
mix & match 5 for $5 + Free Shipping!
Add a Sample Add Sample To Cart
Add 5 more samples to get 5 samples for $5
Add Recommended Grout:
White Non-Sanded Grout
per 5 lbs bag

Design Elements

About the Collection:
Easy. Breezy. Those are the two words to describe the new, luminous Seaport Collection. Taking inspiration from the metropolitan seaport of Boston, the brilliant sea-inspired colors come alive on these high-gloss tiles. Available in 6 colorways and has corresponding chair rail, liners, and bullnose trim pieces. 

About the Tile: With an undeniably gorgeous blue hue, Seaport Aquamarine 2x10 Ceramic Tile captures the raw beauty of the sea's horizon at twilight. This polished, high gloss tile has slight textural grooves that are felt to the touch. Perfect to add as a backsplash in the home wherever you want to create a statement of color. Matching ceramic bullnose, pencil liner, and chair rail available.

+ Show More


1.97" x 9.84"
.13 sq ft
White Body Ceramic
11 mm
Residential Use
Wall Only
Commercial Use
Wall Only
Tile Use
Backsplash Tile, Bathroom Wall Tile, Shower Wall, Kitchen Wall Tile, Wall Tile
Outdoor Use
Country of Origin
Pieces Per Box
Sq Ft Per Box
5.38 sq ft
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 6 answers
Why did you choose this?
TileBar Store
after 10 samples it was the best!
Wendy H on Mar 14, 2019
Bathroom remodel
Peter J on Feb 24, 2019
after 10 samples it was the best!
Wendy H on Mar 14, 2019
Ocean color
Joseph W on Mar 13, 2019
Bathroom remodel
Peter J on Feb 24, 2019
Its the color I wanted for my kitchen
Marcie E on Feb 6, 2019
Ocean color
Joseph W on Mar 13, 2019
Its the color I wanted for my kitchen
Marcie E on Feb 6, 2019
Is this tile waterproof enough to be inside a shower?
Yelena A. on Mar 6, 2019
BEST ANSWER: This tile works perfectly fine on shower walls.

*These are just guidelines. Please refer to and install our products to the standards set by the TCNA.


Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.



  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly is recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16” and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.



  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8th inches or less.
  • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90
  • Highly recommended to purchase the Polished Porcelain Maintenance Kit.



The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.