Reflection Ming Green With Mirror Penny Round Marble & Glass Tile

Roll over image to zoom

More Views

Add Sample to Cart
Reflection Ming Green With Mirror Penny Round Marble & Glass Tile
/ sq. ft.

Covers 1 sq. ft.

Enter sq. ft.
How much do I need?

Availability: In stock

Ships in 1-2 business days $10 Flat Rate Shipping
365 day returns
Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need units. We recommend that you order units (10% extra) to cover cuts and future repairs.

Try a sample for
mix & match 5 for $5 + Free Shipping!
Add a Sample Add Sample To Cart
Add 5 more samples to get 5 samples for $5
Add Recommended Grout:
Dimension Diamond Grout 9 lbs
per 9 lbs bucket

Design Elements

This beautiful combination of marble and glass penny round mosaic, with it's blend of Ming Green and mirrored glass, will leave any room with a contemporary and modern feel. The mesh backing not only simplifies installation, it also allows the tiles to be easily separated which adds to their design flexibility.


+ Show More


Chip Size
Sheet Size
11.25" x 12.75"
1 Sq. Ft.
Ming Green + Mirror
Marble + Glass
8 mm
Residential Use
Floor & Wall
Commercial Use
Wall only
Tile Use
Backsplash Tile, Bathroom Floor Tile, Bathroom Wall Tile, Shower Floor & Wall, Kitchen Floor Tile, Kitchen Wall Tile, Floor Tile, Wall Tile
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 44 answers
Why did you choose this?
TileBar Store
It is beautiful!
Sherry B on Sep 6, 2018
Deborah G on Nov 14, 2017
It is beautiful!
Sherry B on Sep 6, 2018
Jeannette C on May 30, 2018
Deborah G on Nov 14, 2017
Looks good in the photo and the sample I ordered looks pretty. The reviews were good I'll give it a try.
Kelly J on Aug 16, 2017
for master bath shower floor...gorgeous!
Terri A on Jul 19, 2017
Beautiful tile, will look great in our bathroom as an accent.
Angela S on Jun 3, 2017
modern organic natural
Michelle J on Oct 14, 2016
modern, sleek, floor for shower - GORGEOUS!
Kath-Lin F on Oct 5, 2016
This tile will cover the shower floor.
Debra C on Oct 5, 2016
Mix of bright and dark colors as well as tile textures.
Renee D on Sep 5, 2016
beautiful looking
Rudolph M on Aug 4, 2016
Trying to pick the right tile for the master bathroom floor.
Rebecca S on May 23, 2016
Leslie O on Apr 12, 2016
Bought a sample, absolutely beautiful!
Patti M on Feb 26, 2016
I wanted the Ming Green marble rounds to start, and the reflection mirrored rounds added a nice twist to the marble. This is for a shower floor in a beach front condo. I felt it brought a lot of color and style for a beach condo, without being the traditional "beach" look
Guest on Oct 11, 2015
Perfect accent tile for remodeled kitchen.
Carol B on Sep 25, 2015
Jeannette C on May 30, 2018
Looks good in the photo and the sample I ordered looks pretty. The reviews were good I'll give it a try.
Kelly J on Aug 16, 2017
Is this real marble? Is there recommended maintainance? Is it durable enough and or rated for a bathroom floor?
Amanda D on Nov 18, 2015
BEST ANSWER: Yes this is real Ming Green Marble with glass mirror pieces. I'm a General Contractor and I installed this tile in my bathroom shower floor and as an wall accent in the shower, I used an epoxy grout as that will help with any possible grout staining and it is sealed with 511 sealer. You will have to reseal the marble periodically (bi yearly for a standard use shower, more frequently if it's used multiple times a day by many family members).
One note I will make is the mirrored tiles being glass will obviously not absorb any sealer so you will need to polish the floor once the sealer has dried to remove any excess from the glass tiles. I'm very impressed with the finished product.
Can this be on a shower floor?
E D on Dec 21, 2016
BEST ANSWER: Yes, In fact I installed this tile in one of my shower floors.
Remember though, that there is marble in this tile so it will need periodic sealing.
I use epoxy grout for all these kinds of shower floor tiles, simply because of the soap and body oils that are typical in showers, epoxy doesn't change colors and is a great sealed grout. If you use epoxy make sure you clean the tiles well as it's drying, it can be very difficult to remove from a tile face once it's dry.
what is the dimensions of each sheet?
A shopper on Jan 24, 2017
BEST ANSWER: 12" x 12"
Does thia include black pieces? It looks like it from thw photos, but the sample I rec'd did not have any black.
A shopper on Oct 4, 2016
BEST ANSWER: There aren't any black tiles. The mirror/glass tile look black sometimes depending on the light and what angle you are viewing the tile. We have white marble solid surfacing for shower walls and this penny tile on floor with a lot of light from multiple fixtures. Sometimes the glass tiles look black when looking at it from a side angle.
What kind of grout should I use to make it look like the one in the photo? Did anyone use the recommended grout?
Kelly J on Aug 16, 2017
BEST ANSWER: I always use epoxy grout for shower floors, when it dries it's all but water proof plus the bonus of it seldom ever grows molds or changes color with dirt impregnation. If your using a Wedi or any other foam based shower pan any tile 1" or smaller should have epoxy grout to ensure stabilization of the tile. NOTE: when using epoxy grout you cannot leave it dry on the tile surface, it is extremely hard to remove from a tile face especially stone once it dries.
On standard mud based shower floors if your not using an epoxy grout make sure you pick a good quality grout (not a big box store grout).


This material is made of clear and transparent glass. The back of the glass tile is coated with the desired pigment(s) and a white protective coating visible from the back of the tile. The multi-layered protective coating is fired with the tile and ensures that the thin-set mortars will not be visible after installation. The pigments and glass are made from natural minerals and as such the firing process will cause slight variations in shades and size. All material is sorted according to ANSI standard A137 size tolerances and packaging is clearly marked with caliber and shade/tone/dye-lot.



  • These instructions are meant to be a guide for most installations, under normal conditions. Please follow best practice instructions found in the Tile Council of North America (TCNA) 09300 Handbook for specific installation types.


    • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation. Due to the nature of the material and production process it may be possible to see through the clear glass on certain angles which can appear as a lighter line along the edges of the glass. This is not a factory defect or deficiency of any kind in the material and should be expected by the end consumer. *Always use appropriate personal protective safety equipment when handling, drilling, cutting or grinding glass tile such as (but not limited to) eye, ear and hand protection.


      • Before you start tiling, make sure that whatever surface the tiles are being installed to will be strong and structurally sound. Cement board, concrete or drywall is best, as these surfaces can handle the moisture of the tiling process. Plywood should be avoided, since the wood will warp with the added moisture and it will also be less waterproof, even after tiling.



        • To avoid affecting the color of the tile, white thinset such as Bostik PM is strongly recommended for all installations.
        • Apply as much adhesive as can be covered within 10-15 minutes.
        • Tools
          3/16" or 1/4" square notch trowel should be used when installing our glass material and ridges should be smoothed down with the flat side of the trowel prior to fixing the tiles in the mortar bed. Tiles larger than 3x3 should be back-buttered with a thin continuous layer of the thin set applied with the flat side of the trowel.

          Drying Time
          Glass tiles are non-porous: the moisture in the setting materials cannot migrate through the glass and must evaporate slowly through the joints. All setting material, even rapidest mortars need a longer time to cure. Allow thin-set mortar to dry completely for a minimum of 72 hours prior to grouting or otherwise interfering with the fresh installation.

          Use a glasscutter (score and snap) with a new diamond wheel for best results when cutting our glass tiles. Wetting the diamond wheel with oil before cutting will produce the smoothest cuts. In some cases it may be possible to use a wet-saw with a new, continuous rim diamond blade specifically designed for cutting glass. Do not use turbo or other notched blades designed for use with porcelain or ceramic as the teeth can cause a coarse cut, resulting in a heavily chipped edge. To cut angles without a wet saw or grinder, drill a small hole at the apex of the angle prior to cutting. In most cases, this will allow the use of a score and snap cutter and avoid small cracks that can happen at the angle. Cut edges and corners will be sharp. Always be sure to smooth the cut edges manually with a diamond hand pad or ceramic dressing stone.

          If possible, drill holes before installing tile. Drilling from both sides can ensure a cleaner finish if the hole will be visible after installation. Using a new diamond coring bit (for large holes) or spade bit (for small holes) with a diamond tip made for glass drilling will give the best results. Lubricating the bit and tile surface with a continuous spray of oil/water mix will prolong the life of bits and provide a better-finished edge. When possible, the use of a jig will ensure precise placement of holes to be drilled.

          When drilling holes for anchoring bolts, plumbing or any other dissimilar material always ensure a minimum of 1/8" clearance around the item is provided to avoid cracking due to disparate expansion and contraction rates or stress transfer.



        • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90
        • Non-sanded grout that is latex or polymer modified and compliant with A118.4 should be used for our glass material. If sanded grout must be used for technical or aesthetic reasons (such as with mosaics with larger grout joints), gentle application of grout with a soft rubber float is recommended to minimize the possibility of surface scratching. A mock up or testing installation should be executed to ensure results are acceptable.

          After grouting, wipe of excess surface grout with a slightly damp sponge - do not over wash. After initial wash has been allowed to haze, wipe once with minimal pressure at a 45-degree angle to joints and rinse sponge after wiping once with each side. Any remaining haze can be buffed off with a dry towel or cheesecloth after grout surface has dried sufficiently. Grout joints should be a minimum of 1/16” and not butt set. Clean excess grout as the work progresses before it has hardened completely. In the event that a grout haze forms, you can use an acid-free remover such as Deterdek to remove it. Acids should never be used for cleaning grout haze.



        • Highly recommended to purchase the Glass Installation/Maintenance Kit, which contains all you need to maintain and care for your tiles.
        • . For normal care and maintenance of glass tile, wiping the surface with a damp sponge or clothe with water or a light vinegar solution is sufficient. If stronger cleaning is needed, a nonabrasive, neutral pH cleaner can be used.

          Glass tile may be damaged from impact with hard or heavy objects, which can lead to chipping or breakage causing sharp cutting edges that can lead to injuries. Always replace any damaged glass tiles immediately.