Marble Tech Grigio Imperiale 24x24 Polished Porcelain Tile

Roll over image to zoom

Add Sample to Cart
Marble Tech Grigio Imperiale 24x24 Polished Porcelain Tile
$9.95
/ sq. ft.
As Low as $8.42 per sq. ft.
  • Buy 7 for $9.15 per sq. ft. and save 8%
  • Buy 33 for $8.42 per sq. ft. and save 16%
$154.13
/ box

Covers 15.49 sq. ft.

Enter sq. ft.
or
Quantity
box
How much do I need?

Availability: In stock

Ships in 1-2 business days $10 Flat Rate Shipping
365 day returns
Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need units. We recommend that you order units (10% extra) to cover cuts and future repairs.

Try a sample for
$2.99
mix & match 5 for $5 + Free Shipping!
Add a Sample Add Sample To Cart
Add 5 more samples to get 5 samples for $5
Add Recommended Grout:
Overview

Design Elements

About the Tile: Marble Tech Grigio Imperiale's striking gray marble-look tile will elevate your space and leave behind a trail of admirers after they get a glimpse of its beauty. With all the sophistication of real marble delivered in a 24x24 polished porcelain tile. The contrasting grayish white veining adds another level of powerful appeal to this piece. Use on the floors of your kitchen, or bathroom to captivate and make a spectacular impact.

About the Collection: Inspired by marble, the Marble Tech collection encapsulates the essence of the favorite stone with porcelain. Decorate floors and backsplashes with exceedingly high elegance. Comes in 5 colorways, 2 finishes, and 4 size formats. Bullnose also available.

+ Show More
Specs

Specifications

Size
24" x 24"
Coverage
4 Sq Ft
Color
Gray
Material
Porcelain
Finish
Polished
Thickness
10 mm
Look
Marble
Residential Use
Floor and Wall
Commercial Use
Floor and Wall
Tile Use
Backsplash Tile, Bathroom Floor Tile, Bathroom Wall Tile, Shower Wall, Kitchen Floor Tile, Kitchen Wall Tile, Floor Tile, Wall Tile, Commercial Floor
Outdoor Use
No
Rectified
Yes
Country of Origin
Italy
Available Sizes
12" x 24", 24" x 24"
PEI Rating
4
Shade Variation
V2
DCOF
0.45
Weight
70.6500
Pieces Per Box
4
Sq Ft Per Box
15.49 Sq Ft
Reviews
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Installation

*These are just guidelines. Please refer to and install our products to the standards set by the TCNA.

SUBSTRATE

Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

 

INSTALLATION

  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly is recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16” and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.

 

GROUTING

  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8th inches or less.
  • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90

 

CUTTING

The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.

 

CLEANING

Highly recommended to purchase the Polished Porcelain Maintenance Kit. Porcelain tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your porcelain tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although porcelain tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean porcelain tile surfaces.

 

For glazed porcelain tiles, use the following instructions for general cleaning:

  • Sweep or vacuum loose dirt and dust from the floor. An untreated dry dust mop is recommended instead of a broom.
  • Mop the floor with a mild cleaning solution (do not use wax, oil-based, or abrasive cleaners).
  • Rinse the tile thoroughly with clean and clear water.
  • Drying is also recommended – to increase the shine and to prevent water spots.

 

  • Always Remember:

    • Do not clean porcelain tile flooring with ammonia or with cleaners that contain bleach and/or acid. Acid and ammonia based cleaners may modify grout color.
    • Do not use wax, oil-based, abrasive cleaners, or sealants.
    • Agents that contain any dyes or colors are not recommended.
    • Use rugs at entrances to prevent dirt and grit from being tracked onto the tile flooring from outdoors.
    • Do not use steel wool pads, because loose steel particles may create rust stains in the grout.

  Loading...