Loft Seafoam 3x6 Frosted Glass Tile

Roll over image to zoom

Add Sample to Cart
Loft Seafoam 3x6 Frosted Glass Tile
/ sq. ft.

Covers 1 sq. ft.

Enter sq. ft.
sq ft
How much do I need?

Availability: In stock

Ships in 1-2 business days $10 Flat Rate Shipping
365 day returns
Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need units. We recommend that you order units (10% extra) to cover cuts and future repairs.

Try a sample for
mix & match 5 for $5 + Free Shipping!
Add a Sample Add Sample To Cart
Add 5 more samples to get 5 samples for $5
Add Recommended Grout:
White Non-Sanded Grout
per 5 lbs bag

Design Elements


This seafoam green subway tiles are decorative and durable, making it a great backdrop. The glass tile will reflect the light in your room, giving it a fresh, clean and brighter look. Using a subway tile as a backsplash you will add some color and style to your kitchen decor or any decorated room in your home. It will also give it a more distinct look.

+ Show More


Chip Size
Sheet Size
8 pieces per. sq. ft.
Seafoam Green
8 mm
Residential Use
Wall Only
Commercial Use
Wall only
MOHS (Scratch Resistant)
Shade Variation
Chemical Resistant
Water Absorption
< 0.5%
Breaking Strength
> 100 lbs.

Shaken or Stirred?

Early recipes for beer included such ingredients as poppy seeds, mushrooms, aromatics, honey, sugar, bay leaves, butter and bread crumbs.

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 29 answers
Why did you choose this?
TileBar Store
Used it before and loved it. Buying more for another project.
Victor M on Jan 31, 2018
Beautiful color
Chuck H on Aug 23, 2017
Used it before and loved it. Buying more for another project.
Victor M on Jan 31, 2018
it matched the look i was going for
tina h on Sep 27, 2017
Beautiful color
Chuck H on Aug 23, 2017
lovely spa look
Patti J on Jul 6, 2017
Looks just like real sea glass
Scott R on Jun 12, 2017
wanted just a hint of color
Catherine O on Jun 1, 2017
LOVE this! Exactly what I was looking for- sample was very high quality
Jen D on May 17, 2017
received sample. looks very good
john c on Sep 21, 2016
Wanted simple subtle "sea glass" look accent row to tone down a busy granite counter will add your frosted white to finish the job. Too many counters to replace and these are the perfect compromise! Thanks
Patricia K on Jun 5, 2016
Exactly what we were looking for
Edgard R on Dec 5, 2015
Soft subtle color for my kitchen back splash
Mary M on Aug 31, 2015
The color is perfect, and I love the frosted look!
Rachel G on Aug 18, 2015
the Loft seafoam brick was not available.
Rhonda S on Jul 13, 2015
This tile is great for a beach house
Noreen K on Apr 20, 2015
it matched the look i was going for
tina h on Sep 27, 2017
lovely spa look
Patti J on Jul 6, 2017
What color grout did you use? We have white cabinets and "Fantasy Brown" granite that is actually gray, green, white, and a tiny bit brown. I'm hoping not to use white grout, but looking for recommendations. Thanks!
Maureen B on Mar 28, 2016
BEST ANSWER: Beautiful combo !! I like white grout because it looks clean . If you place the subway tiles as shown in pic you won't see that much grout . However if you are totally against you could go with a antique white so it doesn't look so white. Keep in mind if the cabinets are white it will look nice with white or a shade of white . Your call !! Sounds really nice . If you could send me a pic of granite it would help as well .
Could this be used for a shower wall?
Catherine T on Jun 19, 2017
BEST ANSWER: I used it on my kitchen sink back splash and a joining walls. Yes, as long as you use concrete backer board and grout and seal it well. I would not use it over sheet rock or even green board in a shower its to wet and any tile could fail.
Does this tile have pencil tile or bullnose to match?
A shopper on Jan 26, 2016
BEST ANSWER: This tile is beautiful and has beautiful edges -you don't need a bullnose, especially if you have a great tile guy. I wish I could upload pictures, but can't see a way to do it. It would be very helpful for customers to see other projects, I think!
Are these tiles all the same color, or do some have subtle different hues? Can anyone upload a picture of a finished product?
heather on Sep 21, 2015
BEST ANSWER: The tiles are all the same color, but can look a bit different from each other as they catch light differently. They came out beautifully. I'll try to add a picture.
My backsplash is 375 ft x 17 1/2 inches.
How man square ft. do I need?
A shopper on Jun 24, 2015
BEST ANSWER: Hi there! That's an awfully large backsplash - did you mean 37.5 feet by any chance?


This material is made of clear and transparent glass. The back of the glass tile is coated with the desired pigment(s) and a white protective coating visible from the back of the tile. The multi-layered protective coating is fired with the tile and ensures that the thin-set mortars will not be visible after installation. The pigments and glass are made from natural minerals and as such the firing process will cause slight variations in shades and size. All material is sorted according to ANSI standard A137 size tolerances and packaging is clearly marked with caliber and shade/tone/dye-lot.



    • These instructions are meant to be a guide for most installations, under normal conditions. Please follow best practice instructions found in the Tile Council of North America (TCNA) 09300 Handbook for specific installation types.



      • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation. Due to the nature of the material and production process it may be possible to see through the clear glass on certain angles which can appear as a lighter line along the edges of the glass. This is not a factory defect or deficiency of any kind in the material and should be expected by the end consumer. *Always use appropriate personal protective safety equipment when handling, drilling, cutting or grinding glass tile such as (but not limited to) eye, ear and hand protection.



        • Before you start tiling, make sure that whatever surface the tiles are being installed to will be strong and structurally sound. Cement board, concrete or drywall is best, as these surfaces can handle the moisture of the tiling process. Plywood should be avoided, since the wood will warp with the added moisture and it will also be less waterproof, even after tiling.




  • To avoid affecting the color of the tile, white thinset such as Bostik Glass-Mate is strongly recommended for all installations.
  • Apply as much adhesive as can be covered within 10-15 minutes.


3/16" or 1/4" square notch trowel should be used when installing our glass material and ridges should be smoothed down with the flat side of the trowel prior to fixing the tiles in the mortar bed. Tiles larger than 3x3 should be back-buttered with a thin continuous layer of the thin set applied with the flat side of the trowel.

Drying Time
Glass tiles are non-porous: the moisture in the setting materials cannot migrate through the glass and must evaporate slowly through the joints. All setting material, even rapidest mortars need a longer time to cure. Allow thin-set mortar to dry completely for a minimum of 72 hours prior to grouting or otherwise interfering with the fresh installation.

Use a glasscutter (score and snap) with a new diamond wheel for best results when cutting our glass tiles. Wetting the diamond wheel with oil before cutting will produce the smoothest cuts. In some cases it may be possible to use a wet-saw with a new, continuous rim diamond blade specifically designed for cutting glass. Do not use turbo or other notched blades designed for use with porcelain or ceramic as the teeth can cause a coarse cut, resulting in a heavily chipped edge. To cut angles without a wet saw or grinder, drill a small hole at the apex of the angle prior to cutting. In most cases, this will allow the use of a score and snap cutter and avoid small cracks that can happen at the angle. Cut edges and corners will be sharp. Always be sure to smooth the cut edges manually with a diamond hand pad or ceramic dressing stone.

If possible, drill holes before installing tile. Drilling from both sides can ensure a cleaner finish if the hole will be visible after installation. Using a new diamond coring bit (for large holes) or spade bit (for small holes) with a diamond tip made for glass drilling will give the best results. Lubricating the bit and tile surface with a continuous spray of oil/water mix will prolong the life of bits and provide a better-finished edge. When possible, the use of a jig will ensure precise placement of holes to be drilled.

When drilling holes for anchoring bolts, plumbing or any other dissimilar material always ensure a minimum of 1/8" clearance around the item is provided to avoid cracking due to disparate expansion and contraction rates or stress transfer.




Non-sanded grout that is latex or polymer modified and compliant with A118.4 should be used for our glass material. If sanded grout must be used for technical or aesthetic reasons (such as with mosaics with larger grout joints), gentle application of grout with a soft rubber float is recommended to minimize the possibility of surface scratching. A mock up or testing installation should be executed to ensure results are acceptable.

After grouting, wipe of excess surface grout with a slightly damp sponge - do not over wash. After initial wash has been allowed to haze, wipe once with minimal pressure at a 45-degree angle to joints and rinse sponge after wiping once with each side. Any remaining haze can be buffed off with a dry towel or cheesecloth after grout surface has dried sufficiently. Grout joints should be a minimum of 1/16” and not butt set. Clean excess grout as the work progresses before it has hardened completely. In the event that a grout haze forms, you can use an acid-free remover such as Deterdek to remove it. Acids should never be used for cleaning grout haze.





. For normal care and maintenance of glass tile, wiping the surface with a damp sponge or clothe with water or a light vinegar solution is sufficient. If stronger cleaning is needed, a nonabrasive, neutral pH cleaner can be used.

Glass tile may be damaged from impact with hard or heavy objects, which can lead to chipping or breakage causing sharp cutting edges that can lead to injuries. Always replace any damaged glass tiles immediately.