Archea Grigio 24x36 Porcelain Tile

Roll over image to zoom

Archea Grigio 24x36 Porcelain Tile
/ sq. ft.
As Low as $5.27 per sq. ft.
  • Buy 6 for $5.73 per sq. ft. and save 9%
  • Buy 29 for $5.27 per sq. ft. and save 16%
/ box

Covers 17.43 sq. ft.

How much do I need?

Availability: Out of stock

Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need units. We recommend that you order units (10% extra) to cover cuts and future repairs.

This item is out of stock. To place a pre-order, call 888-541-3840, or click on the NOTIFY ME button to be automatically notified when it becomes available.
Add Recommended Grout:

Design Elements

Archea Grigio 24x36 Porcelain Tile

Archea was created from the evolution of metropolitan style, generated from the rediscovery of basic materials that make up the urban fabric. The interplay between different surfaces such as cement, wood, metal, ceramic and majolica results in something new and wonderful with a natural and contemporary flavor. Available in 4 distinct colorways in a large 24x36 format.

+ Show More


24" x 36"
5.81sq ft
Residential Use
Floor & Wall
Commercial Use
Floor & Wall
Outdoor Use
Country of Origin
Shade Variation
Frost Resistant
Pieces Per Box
Sq Ft Per Box
Box Weight
Box Per Pallet
Sq Ft Per Pallet
Pallet Weight
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 7 answers
Why did you choose this?
TileBar Store
for the size and color
mary w on Jun 29, 2018
for the size and color
mary w on Jun 29, 2018
Is it suitable for kitchen counters? Is it smooth or rough
A shopper on Feb 27, 2018
BEST ANSWER: I bought a lot of this recently. It's fairly smooth and non-porous. I assume it would work for a counter top, but you'll obviously have some grout lines.
What is the COF for these tiles?
A shopper on Oct 3, 2017
BEST ANSWER: I'm afraid that this tile has yet to be tested for its COF.
do you give a decorator's discount?
monica f on Oct 24, 2016
BEST ANSWER: We have a VIP program for people in the trade, which you can register for at this link. Registration is completely free.
Is this suitable for shower tile?
Heather W on Dec 19, 2017
BEST ANSWER: Yes, absolutely.
what grout is used for installtion of the Archea grigio?
monica f on Oct 24, 2016
BEST ANSWER: Unsanded grout should be used in joints that are less than 1/8-inch-wide. It has a smooth texture and clings well to vertical surfaces, which makes it useful for grouting ceramic wall tiles. Sanded grout should be used for flooring and wall tile joints wider than 1/8 inch because it resists shrinkage and cracking.
Can this tile be used outside on a patio?
A shopper on Sep 16, 2016
BEST ANSWER: Yes, this tile can be used outside on a patio.


Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.



  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16”; and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.



  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8 inch or smaller.
  • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90



The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.



Highly recommended to purchase the Unpolished Porcelain Maintenance Kit. Porcelain tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your porcelain tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although porcelain tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean porcelain tile surfaces.


For cleaning unpolished surfaces, follow these instructions:

  • Sweep or vacuum dust and debris from the floor. When sweeping, use a soft-bristle broom and sweep in 2 directions. First follow the direction of the tile, and then sweep diagonally. This will ensure the removal of all foreign material that might be residing in the texture.
  • Saturate the tile with a neutral cleaning solution, such as vinegar, with hot water and stir. Allow the cleaning solution to remain on the floor 5 – 10 minutes. Scrub the floor with a brush; again using a two-direction method.
  • Rinse the floor with clean, clear water to remove the cleaning solution.
  • For high traffic locations, it is recommended to clean the floor at least once per day and wet mop at regular intervals.


  • Always Remember:

    • Do not clean porcelain tile flooring with ammonia or with cleaners that contain bleach and/or acid. Acid and ammonia based cleaners may modify grout color.
    • Do not use wax, oil-based, abrasive cleaners, or sealants.
    • Agents that contain any dyes or colors are not recommended.
    • Use rugs at entrances to prevent dirt and grit from being tracked onto the tile flooring from outdoors.
    • Do not use steel wool pads, because loose steel particles may create rust stains in the grout.