Maverick Leather Copper 3x8 Pillowed Ceramic Tile

Roll over image to zoom

Add Sample to Cart
Maverick Leather Copper 3x8 Pillowed Ceramic Tile
$22.61
/ sq. ft.
As Low as $19.14 per sq. ft.
  • Buy 31 for $20.80 per sq. ft. and save 9%
  • Buy 92 for $19.14 per sq. ft. and save 16%
$73.95
/ box

Covers 3.27 sq. ft.

Enter sq. ft.
or
Quantity
box
How much do I need?

Availability: In stock

Ships in 1-2 business days $10 Flat Rate Shipping
365 day returns
Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need units. We recommend that you order units (10% extra) to cover cuts and future repairs.

Try a sample for
$2.99
mix & match 5 for $5 + Free Shipping!
Add a Sample Add Sample To Cart
Add 5 more samples to get 5 samples for $5
Add Recommended Grout:
Flash Walnut Non-Sanded Grout
$23.00
per 5 lbs bag
Overview

Design Elements

About the collection: Sophistication can be yours with the Maverick Leather Ceramic Collection. This set comes in 6 color options which can be used in a variety of rooms as a distinguished accent wall.

About the tile: Seeking a way to make your space more sleek? This leather-look tile in copper coloring will do just that. Adding a bit of depth with its pillowed shape, it's the perfect addition to any bathroom or kitchen. The crackled ceramic tile is made by hand and under high pressure, which gives way to unique size, color, and thickness. 20 pieces per box.

+ Show More
Specs

Specifications

Size
3" x 8"
Coverage
.16 sq ft
Color
Copper
Material
Crackled Ceramic
Finish
Polished
Thickness
8 mm-12 mm
Residential Use
Wall Only
Commercial Use
Wall Only
Outdoor Use
No
Weight
19.7000
Pieces Per Box
20
Sq Ft Per Box
3.27 sq ft
Misc. Info
This tile is made by hand and is high fired. This causes a considerable amount of variation in size, color and thickness.
Reviews
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Installation

*These are just guidelines. Please refer to and install our products to the standards set by the TCNA.

SUBSTRATE

Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

 

INSTALLATION

  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly is recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16” and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.

 

GROUTING

  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8th inches or less.
  • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90
  • Highly recommended to purchase the Polished Porcelain Maintenance Kit.

 

CUTTING

The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.

  Loading...