Diesel Ribbed Black 8x24 Polished Ceramic Tile

Roll over image to zoom

Add Sample to Cart
Diesel Ribbed Black 8x24 Polished Ceramic Tile
$6.91
per sq. ft.
As Low as $5.85 per sq. ft.
  • Buy 7 boxes for $6.36 per sq. ft. and save 9%
  • Buy 33 boxes for $5.85 per sq. ft. and save 16%
Enter sq. ft.
Help me calculate it

You entered:

sq. ft.

($6.91 per sq. ft.)

Boxes Needed (1 box = )
sq ft included (1 box = sq ft)
Total price
Quantity

Availability: In stock

$107.07
per box sq. ft. needed (/box) = boxes
You're purchasing ( total sq. ft.)
Ships in 1-2 business days $10 Flat Rate Shipping
365 day returns
Sold by the box 15.49 sq feet in a box
Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need units. We recommend that you order units (10% extra) to cover cuts and future repairs.

Try a sample for
$2.99
mix & match 5 for $5 + Free Shipping!
Add a Sample Add Sample To Cart
Add 5 more samples to get 5 samples for $5
Add Recommended Grout:
French Gray Non-Sanded Grout
$23.00
per 5 lbs bag
Overview

Design Elements

Diesel Ribbed Black 8x24 Polished Ceramic Tile
+ Show More
Specs

Specifications

Size
8" x 24"
Coverage
1.33 sq ft
Color
Black
Material
Ceramic
Finish
Polished
Thickness
7mm
Residential Use
Wall Only
Commercial Use
Wall Only
Outdoor Use
No
Country of Origin
Italy
Chemical Resistance
Yes
Water Absorption
>10%
Breaking Strength
>15N
Weight
41.2000
Sq Ft Per Box
15.49 sq ft
Reviews
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Installation

*These are just guidelines. Please refer to and install our products to the standards set by the TCNA.

SUBSTRATE

Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

 

INSTALLATION

  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly is recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16” and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.

 

GROUTING

  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8th inches or less.
  • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90
  • Highly recommended to purchase the Polished Porcelain Maintenance Kit.

 

CUTTING

The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.

  Loading...