Printing tear sheetClick here to close this tab and return to where you were.
Whimsical Iridescent Teal Glass Tile
Be the star in your very own fairytale and add a vibrant pop of color to any room with these beautiful tiles that are versatile; great to use for a kitchen backsplash, fireplace or pool installation. Composed of polished glass in various shades of green and white, with iridescent accents, this spellbinding Teal selection from our Whimsical Collection will enchant your senses.
- Chip Size
- ½” x ½”
- Sheet Size
- 11 ¾” x 11 ¾”
- 0.96 Sq. Ft.
- Shades of Green, White + Iridescent
- 4 mm
Shaken or Stirred?
Most Scotch casks are used bourbon barrels made of American oak. Some distilleries also age whisky in old sherry, wine and even rum casks. The final product has to be a minimum of 80 proof. After malting, the barley used for many Scotches, especially those made on the island of Islay, is dried using smoke from burning peat. This gives the finished whisky a pronounced smoky flavor.
Browse 2 questions Browse 2 questions and 7 answersWhy did you choose this?TileBar StoreWe remodeled kitchen in old home with this product, moved a year later and just finished remodeling kitchen at new house with same colors and styles, this tile on the back splash makes it all pop!Raymond W on Jan 8, 2017What's the best grout color for this tile?BEST ANSWER: I am using a very light gray. I tried placing blue, white, off white and gray pieces next to it and my counter and the gray works best. I suggest going to a store with a sample tile and see which works best for you.
Disclaimer: Due to the transparent nature of most of our tile please consider choices carefully. Tiles are handmade so variations in color and texture are to be expected. All tiles should be inspected before installation, as no adjustment will be made after installation. Maintainance:
- Abrasive cleaners should not be used.
- Use Filavia Bango for cleaning the glass tiles.
- You can also use microfiber cleaning cloths. Fibers in this type of cloth are thinner as compared to other cloths. This material resist scratching of surfaces.
- You can also use glass cleaner such as Windex from time to time remove fingerprints. Spray glass cleaner on the tile and wipe down. Rinse the tiles and then towel dry.
Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.INSTALLATION
- To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Grout joint should be a minimum of 1/16” and not butt set.
- The trowel size you can use is a 9" Trowel - 1/16" square notch.
The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.