Printing tear sheetClick here to close this tab and return to where you were.
Cloudburst Free Form Cracked Joint Brick Marble Tile
This striking Moonstone, White Thassos, and White Carrara marble mosaic will provide endless design possibilities, from contemporary to classic, and will serve as a great focal point to suit a variety of settings. The mesh backing not only simplifies installation, it also allows the tiles to be easily separated which adds to their design flexibility. The tiles are finished with a cracked joint look. The natural stone material will have a color variation.
- Chip Size
- 1/5" 1/3" 5/8"x Random
- Sheet Size
- Moonstone, White Thassos, and White Carrera
- Residential Use
- Commercial Use
Shaken or Stirred?
The Pilgrims landed at what is now Plymouth, Massachusetts, rather than continue sailing because they were running out of supplies, especially alcohol beverage.
Browse 2 questions Browse 2 questions and 3 answersWhy did you choose this?TileBar StoreWhat color is moonstone?BEST ANSWER: Moonstone is a muted blue.
Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.INSTALLATION
- To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations.
- Apply thin-set using a trowel as recommended by the manufacturer.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Once you adhere tile to the wall, you would first apply the grout release before grouting.
- Once Fila MP/90
The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass and stone. Edges can be sanded smooth after cutting.