Printing tear sheetClick here to close this tab and return to where you were.
LOFT TURQUOISE FROSTED 2" X 2" GLASS TILES
Make your backsplash the kitchen's, bathroom, or decorated room focal point by using this striking 2x2 pattern tile. Add some color and style to your decor! This should give it a more distinct look. These glass tiles will add a durable lasting beauty and value to your bathroom, kitchen, fireplace or pool installation. The color is painted on the back of the tile so it will not scratch or chip off.
- Chip Size
- Sheet Size
- 12" x12"
- 8 mm
- MOHS (Scratch Resistant)
- Shade Variation
- Chemical Resistance
- Water Absorption
- < 0.5%
- Breaking Strength
- > 100 lbs.
Shaken or Stirred?
In Pennsylvania the tax on wine and spirits is called the Johnstown Flood tax because it was imposed in 1936 to raise funds to help the city of Johnstown rebuild and recover from a devastating flood that year. The city of Johnstown quickly rebuilt and recovered but the tax still continues. It currently costs the taxpayers of the state over $160,000,000.00 each year.
Browse 1 question Browse 1 question and 3 answersWhy did you choose this?TileBar StoreIt's close to exactly what I wanted.John T on Sep 26, 2015
Substrate: Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout. Installation: To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations. A second option is regular tile wall glue. Grout joint should be a minimum of 1/16” and not butt set. Apply thin-set using a trowel as recommended by the manufacturer. Apply as much adhesive as can be covered within 10-15 minutes. Once set in place gently tap using a grout float to insure full bedding and a true surface. Grouting: Grout joints should be packed full and free of voids and pits. Clean excess grout as the work progresses before it has hardens completely. Acids should never be used for cleaning grout haze. Use a damp sponge for the final cleaning and to smooth out the grout joints. When grout is completely cured a grout sealer should be applied as recommended by manufacturer. Cutting: Tile can be cut using a wet saw with a diamond “cut-off” blade. Edges can be sanded smooth after cutting.