Printing tear sheetClick here to close this tab and return to where you were.
Loft Blue Gray Polished 3x6 Glass Tile
This blue gray subway tiles are decorative and durable, making it a great backdrop. The glass tile will reflect the light in your room, giving it a fresh, clean and brighter look. Using a subway tile as a back splash you will add some color and style to your kitchen decor or any decorated in your home. It will also give it a more distinct look.
- Chip Size
- Sheet Size
- 8 piece per sq. ft.
- Blue Gray
Shaken or Stirred?
A key reason for such robust sales of Irish whiskey is its signature smoothness and sweetness, which makes it incredibly easy to drink. This unique flavor profile is due to two major factors: The whiskey is usually distilled three times, and the barley is rarely dried over burning peat. (Most Scotch is distilled twice and the malt is often peated, giving a smoky flavor.)
Browse 2 questions Browse 2 questions and 12 answersWhy did you choose this?TileBar StoreThe size I wanted, 4x16, will not be available until the end of September.Deborah C on Aug 22, 2016do the glass subway tiles require spacers?BEST ANSWER: the contractors I hired did not use spacers. the tile looks great. i was happy with my purchase.
Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.INSTALLATION
- To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Grout joint should be a minimum of 1/16” and not butt set.
- The trowel size you can use is a 9" Trowel - 1/16" square notch.
- Grout joints should be packed full and free of voids and pits.
- Clean excess grout as the work progresses before it has hardens completely.
- Acids should never be used for cleaning grout haze.
- Use a damp sponge for the final cleaning and to smooth out the grout joints.
- It is recommended to use non-sanded grout.
The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.