Printing tear sheetClick here to close this tab and return to where you were.
BLUE MACAUBA 3/4" X 3/4" STONE TILE
Go ahead and pick that jaw of yours up off the floor. This striking marble mosaic is made from genuine Blue Macauba, one of the rarest stones in the world. This breathtaking blue masterpiece will effortlessly inject a dramatic and attractive design into any room. Wow your family and woo your friends with this divine selection!
- Blue Macauba
- Chip Size
- 3/4" x 3/4"
- Sheet Size
- 11 3/4" x 11 1/2"
Shaken or Stirred?
"I'm only a beer teetotaler, not a champagne teetotaler; I don't like beer." - George Bernard Shaw
Browse 1 question Browse 1 question and 3 answersWhy did you choose this?TileBar StoreYou need to see this marble to believe it - I got a sample and it is incredible!Samuel D on Mar 26, 2015
Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. Tile must be sealed.INSTALLATION
- To avoid affecting the color of the tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Grout joint should be a minimum of 1/16” and not butt set.
- The trowel size you can use is a 9" Trowel - 1/16" square notch.
- Use Non-Sanded grout
- Grout joints should be packed full and free of voids and pits.
- Clean excess grout as the work progresses before it has hardens completely.
- Acids should never be used for cleaning grout haze.
- Use a damp sponge for the final cleaning and to smooth out the grout joints.
- It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as our MP90
- Highly recommended to purchase the Glass & Stone Installation/Maintenance Kit - http://www.TileBar.com/collection/tiling-supplies/glass-stone-tile-maintenance-package.html
The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.