Printing tear sheetClick here to close this tab and return to where you were.
Illusion 3D Brick Crema Marfil Marble Tile
This distinctive pattern is made of various sized pieces of marble in crema marfil. The 3D brick pattern gives a unique and elegant design to your room. This modern and contemporary tile can be used as feature wall, backsplash, fireplace, bathroom, or kitchen. Considered to be one of the most popular marbles in the world, Crema Marfil’s timeless beauty opens doors to endless applications. This stone cappuccino colored marble has a tone range of light to medium. Occasionally ribboned throughout the tile are natural calcium veins of soft brown or orangish color and very few signs of fossils.
- Chip Size
- 3D Brick Pattern
- Sheet Size
- 12" x12"
- Crema Marfil
Shaken or Stirred?
In old England, a whistle was baked into the rim or handle of ceramic cups used by pub patrons. When they wanted a refill, they used the whistle to get service. So when people went drinking, they would "wet their whistle."
Browse 1 question Browse 1 question and 1 answer
Substrate: Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout. Installation: To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations. A second option is regular tile wall glue. Grout joint should be a minimum of 1/16” and not butt set. Apply thin-set using a trowel as recommended by the manufacturer. Apply as much adhesive as can be covered within 10-15 minutes. Once set in place gently tap using a grout float to insure full bedding and a true surface. Grouting: No grout needed. Cutting: Tile can be cut using a wet saw with a diamond “cut-off” blade. Edges can be sanded smooth after cutting.