Printing tear sheetClick here to close this tab and return to where you were.
What better way to boldly reintroduce one of our most popular patterns but to simply reinvent it? Composed of marble and glass and presented in a timeless-with-a-twist Herringbone pattern, these gorgeous mixed mosaics contain hand-pressed pieces filled with colored crushed glass chips that will capture and reflect light, creating an intensely faceted visual appearance ideal for an eye popping backsplash or accent wall.
- Chip Size
- .5625" x 3.875"
- Sheet Size
- 10" x 11"
- 0.76 sq. ft.
- Slate + Gray + Cream
- Marble + Glass
- Polished + Matte
- 10 mm
- Residential Use
- Wall Only
- Commercial Use
- Wall only
Shaken or Stirred?72% of the adult French population finds it difficult to understand French wine labels.
Browse 2 questions Browse 2 questions and 4 answersWhy did you choose this?TileBar StoreI've been searching high and low for a unique herringbone tile for my backsplash with these colors!! I so hope it works!Romaine K on Sep 2, 2016Can this be used on the floor?BEST ANSWER: This tile is not suitable for floors.
p> STONE INSTALLATION
These instructions are meant to be a guide for most installations, under normal conditions. Please follow best practice instructions found in the Tile Council of North America (TCNA) 09300 Handbook for specific installation types.
Due to the natural of the material no two pieces of natural stone are exactly alike. Natural stones are products of nature; therefore, variations in color, pattern, texture, and veining will occur. Verify all products before installation for any damage or defects such as chipped edges, broken pieces. No adjustment will be made after installation.
*Always use appropriate personal protective safety equipment when handling, drilling, cutting or grinding glass tile such as (but not limited to) eye, ear and hand protection.
Before you start tiling, make sure that whatever surface the tiles are being installed to will be strong and structurally sound. Cement board, concrete or drywall is best, as these surfaces can handle the moisture of the tiling process. Plywood should be avoided, since the wood will warp with the added moisture and it will also be less waterproof, even after tiling.