Printing tear sheetClick here to close this tab and return to where you were.
Octave Jerusalem Gold With Wood Onyx Marble Tile
One of the most popular marbles in the world, Jeruslame Gold's timeless beauty opens doors to endless design opportunities. Perfect for a bathroom floor or backsplash application, this geometric mosaic is sure to be the focal point of your design. These patterns are made from natural stones, each piece fitting into the next like a perfect puzzle. It's stunning design and unique pattern of octagons and diamonds will bring warmth and a natural ambiance to your home for many years. to come.
- Chip Size
- 2" x 3 3/4" Dot 1/2" x 1/2"
- Sheet Size
- 11.875" x 13"
- 1.07 sq. ft.
- Jerusalem Gold + Wood Onyx
- 10 mm
Shaken or Stirred?
A bottle of Champagne contains approximately 49 million bubbles.
Browse 4 questions Browse 4 questions and 6 answerscleaning or care of polished marble?BEST ANSWER: When some grease pops on my tile I just use a spray bottle of degreaser, wait a minute then wipe clean.I am considering using th Octave Jerusalem Gold and Wood Onyx Dot tile as a backsplash feature behind the cooktop and was wondering what tiles are recommended to coordinate and complete walls and the open ends under the cabinets. Also, is there a border tile in the wood onyx that can trim around the cooktop backsplash feature? Thanks!BEST ANSWER: In my professional opinion, I would get a 12x12 jerusalem gold field tile and have it cut to a 4x12 and lay them in a brick joint. You're installer can bullnose the end pieces of a stone tile so there is no trim piece needed or you can order the jerusalem gold pencil. The pencil is also a great trim for around the accent tiles for the stove surround. Keep your grout joints really small so as not to date the installation.What is the best way to cut the title?BEST ANSWER: Using a wet saw.
Substrate: Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout. Installation: To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations. A second option is regular tile wall glue. Grout joint should be a minimum of 1/16” and not butt set. Apply thin-set using a trowel as recommended by the manufacturer. Apply as much adhesive as can be covered within 10-15 minutes. Once set in place gently tap using a grout float to insure full bedding and a true surface. Grouting: Grout joints should be packed full and free of voids and pits. Clean excess grout as the work progresses before it has hardens completely. Acids should never be used for cleaning grout haze. Use a damp sponge for the final cleaning and to smooth out the grout joints. When grout is completely cured a grout sealer should be applied as recommended by manufacturer. It is recommended to use Non-Sanded Grout. Cutting: Tile can be cut using a wet saw with a diamond “cut-off” blade. Edges can be sanded smooth after cutting.