Printing tear sheetClick here to close this tab and return to where you were.
NIGHTLIGHT BLACK BLEND 1/2" X 1/2" GLASS TILES
This dramatic glass and stone combination creates a beautifully multi-dimensional effect that is perfect for use in kitchen backsplashes, bathrooms and any decorated spot in your home. The mesh backing not only simplifies installation, it allows the tiles to be easily separated which adds to their design flexibility. Own the night and get in touch with your nocturnal side with this daring selection.
- Chip Size
- Squares 1/2" x 1/2"
- Sheet Size
- 12" x12"
- Dark Gray & Black
- Stone & Glass
- Polished, Frosted & Iridescent
- 8 mm
- Residential Use
- Wall Only
- Commercial Use
- Wall only
Shaken or Stirred?
A key reason for such robust sales of Irish whiskey is its signature smoothness and sweetness, which makes it incredibly easy to drink. This unique flavor profile is due to two major factors: The whiskey is usually distilled three times, and the barley is rarely dried over burning peat. (Most Scotch is distilled twice and the malt is often peated, giving a smoky flavor.)
Browse 4 questions Browse 4 questions and 8 answersDid anyone use a grout color other than the suggested gray?BEST ANSWER: I used Black. Then followed it up with a shinny sealant. I used them in a diamond shape. Then end result was fantastic. I used 12 x12 black granite squares. My kitchen is breathtaking.How thick is tile?BEST ANSWER: 1/4". Looks great too!Can these tiles be easily removed from the backing mesh?BEST ANSWER: yes
Substrate: Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout. Installation:
- To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations. A second option is regular tile wall glue.
- Grout joint should be a minimum of 1/16” and not butt set.
- Apply thin-set using a trowel as recommended by the manufacturer. Apply as much adhesive as can be covered within 10-15 minutes. Once set in place gently tap using a grout float to insure full bedding and a true surface.
- Grout joints should be packed full and free of voids and pits.
- Clean excess grout as the work progresses before it has hardens completely.
- Acids should never be used for cleaning grout haze.
- Use a damp sponge for the final cleaning and to smooth out the grout joints.
- When grout is completely cured a grout sealer should be applied as recommended by manufacturer.
- It is recommended to use non-sanded grout.
- It is recommended to use grout release, then grout the tile, then use a sealant to the tile.