Printing tear sheetClick here to close this tab and return to where you were.
Nexus Baci Mini Brick Glass + Stone Tile
This lovely glass and stone combination creates a beautifully multidimensional effect that would work well in any kitchen backsplash or decorated spot in your home. Composed of dark olive and khaki colored glass, in both polished & frosted finishes, and paired with wooden beige marble, this tile is suitable for a variety of settings. The mesh backing not only simplifies installation, it also allows the tiles to be easily separated which adds to their design flexibility.
- Chip Size
- 1/2" x 1 1/2"
- Sheet Size
- 10 1/4" x 11 1/2"
- 0.82 Sq. Ft.
- Dark Olive, Khaki, Wooden Beige
- Glass + Marble
- Polished + Frosted
- 8 mm
- Residential Use
- Wall Only
- Commercial Use
- Wall only
Shaken or Stirred?
Sip aged cognacs neat, with perhaps a drop or two of water. Younger cognacs are perfect for mixing and are the base of many classic cocktails, including the Sidecar, the Between the Sheets and even the original Mint Julep. The spirit may also be simply added to a flute of Champagne or a glass of ginger ale, or enjoyed with a splash of soda water.
Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.INSTALLATION
- To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations.
- Apply thin-set using a trowel as recommended by the manufacturer.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Grout joint should be a minimum of 1/16” and not butt set.
- The trowel size you can use is a 9" Trowel - 1/16" square notch.
- Grout joints should be packed full and free of voids and pits.
- Clean excess grout as the work progresses before it has hardens completely.
- Acids should never be used for cleaning grout haze.
- Use a damp sponge for the final cleaning and to smooth out the grout joints.
- It is recommended to use non-sanded grout.
- It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as our CUTTING
The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.