Return to top
Etched Black Ice Blend_Main
Move your mouse over image or click to enlarge
Etched Black Ice Blend_Main Etched Black Ice Blend_closeup Etched Black Ice Blend_Bottom_edge Etched Black Ice Blend_corner_closeup Etched Black Ice Blend_corner Etched Black Ice Blend_bottom_closeup METALLIC ETCHED BLACK ICE BLEND 1/2" X 1/2" MARBLE & GLASS TILES_6 METALLIC ETCHED BLACK ICE BLEND 1/2" X 1/2" MARBLE & GLASS TILES_7 METALLIC ETCHED BLACK ICE BLEND 1/2" X 1/2" MARBLE & GLASS TILES_8
Add To Compare

Add to favorites

Metallic Etched Black Ice Blend 1/2" X 1/2" Marble & Glass Tiles

Step 1

Try Before You Buy

Step 2

Ready to Order?

Get a Sample

Free Shipping

$2.99 each +Try More!

Mix & Match 5 for $5

Free Shipping

Ships in 1-2 business days

  per sheet

List Price: $26.00

Our Price: $16.95

Closeout Price: $13.50

You Save: $12.50 (48%)

Buy 100 for $10.99 each and save 35%
Buy 200 for $9.50 each and save 44%
Design Elements

Metallic Etched Black Ice Blend 1/2" x 1/2" Glass Tile

Bring art to your kitchen, bathroom, pool or any decorated room with this combination of honed charcoal gray, blue iridized marble, silver and black glass and silver etched ivory decos. Gives any room a contemporary and modern ambiance. The mesh backing not only simplifies installation, it also allows the tiles to be separated which adds to their design flexibility.

It is not recommended to be installed in a pool or anywhere the tile will be submerged in water. As well water will be in direct contact such as shower wall, floor and etc.

  • Chip Size: 1/2"x1/2"
  • Color: Charcoal Gray, Blue Iridized, Silver, Black, Ivory Decos
  • Material: Glass + Marble
  • Finish: Polished, Honed, Iridized + Etched
  • Sold By The Sheet
  • Sheet Size: 12"x12"
  • Recommended Grout Color
    This tile does not need to be grouted
    Shaken or Stirred?

    During World War II, reduction of consumption activists argued that soldiers should not be permitted to drink alcohol beverages. However, General George C. Marshall, Chief of Staff of the U.S. Army, insisted that such prohibition would be 'harmful to the men in the service."

    • Reviews
    • Installation
    • Video
    • Q&A

    Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

    • To avoid affecting the color of glass tile, White modified thin-set is recommended for all installations.
    • Apply thin-set using a trowel as recommended by the manufacturer. 
    • Apply as much adhesive as can be covered within 10-15 minutes. 
    • Grout joint should be a minimum of 1/16” and not butt set.
    • The trowel size you can use is a 9" Trowel - 1/16" square notch.
    • Grout joints should be packed full and free of voids and pits.
    • Clean excess grout as the work progresses before it has hardens completely.
    • Acids should never be used for cleaning grout haze.
    • Use a damp sponge for the final cleaning and to smooth out the grout joints.
    • It is recommended to use non-sanded grout.
    • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as our MP90
    • Highly recommended to purchase the Glass & Stone Installation/Maintenance Kit -

    The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.

    This tile does not need to be grouted
    Browse 1 question and 1 answer
    Hide answersShow all answers | Sort by
    How thick is this tile?
    A shopper on Apr 19, 2015
    Best Answer: 1/4 inch
    Reply · Report · ilene w on Apr 19, 2015
    · Add Answer · I Have This Question Too (0)

    When you buy 4 or more samples from, we will include a $20 Gift Card with your order!

    • Can be used towards all products or samples on
    • Can be combined with any other coupons
    • Free priority shipping on both your samples and your gift card
    • Gift card is good toward your next purchase and will be shipped together with your samples