Printing tear sheetClick here to close this tab and return to where you were.
METAL COPPER STAINLESS STEEL 3/8X4 STICK BRICK TILES
The clean geometric design with the metal copper stainless steel is chic and visually striking. The tile will provide any room with a sleek, stylish and contemporary appearance. This is a great alternative to use for in a kitchen backsplash, feature wall or as decorative borders.
- Chip Size
- 3/4" x 4"
- Sheet Size
- 12" x 12 1/4"
- 1.02 Sq. Ft.
- Metal Copper
- Stainless Steel
- 5 mm
Shaken or Stirred?
The 1918 flu epidemic led to a tequila boom in Mexico as doctors advised ailing patients to drink tequila, lime, and salt as a remedy.
Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks.INSTALLATION
- To avoid affecting the color of the tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Grout joint should be a minimum of 1/16” and not butt set.
- The trowel size you can use is a 9" Trowel - 1/16" square notch.
- Grout joints should be packed full and free of voids and pits.
- Clean excess grout as the work progresses before it has hardens completely.
- Acids should never be used for cleaning grout haze.
- Use a damp sponge for the final cleaning and to smooth out the grout joints.
- It is recommended to use non-sanded grout.
- Highly recommended to purchase the Glass & Steel Installation/Maintenance Kit - http://www.TileBar.com/collection/tiling-supplies/stainless-steel-tile-maintenance-package.html
The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.