Loft Cherry Red Polished 2x2_MainLoft Cherry Red Polished 2x2_Main
Move your mouse over image or click to enlarge
Loft Cherry Red Polished 2x2_Main Loft Cherry Red Polished 2x2_bottom_edge Loft Cherry Red Polished 2x2_bottom_closeup Loft Cherry Red Polished 2x2_corner Loft Cherry Red Polished 2x2_corner_closeup Loft Cherry Red Polished 2x2_closeup
Add To Compare

Add to favorites

Loft Cherry Red Polished 2 X 2 Glass Tiles

Step 1

Try Before You Buy

Step 2

Ready to Order?

Get a Sample

Free Shipping

$2.99 each +Try More!

Mix & Match 5 for $10

Free Shipping

Usually Ships in 24 to 48 Hours

  Price is per sheet

Our Price: $15.95

You Save: $8.05 (34%)

Design Elements

LOFT CHERRY RED POLISHED 2\" X 2\" GLASS TILES

2\" x 2\" polished glass tiles in a cherry red color . These glass tiles are will add durable lasting beauty, and value to your bathroom, kitchen, fireplace or pool installation. Sold by the sheet . Sheet Size : 12x 12

  • Size: ? Length: 2\" ? Width: 2\" ? Projection: 8mm
  • Finish Shown: polished cherry red, the color is painted on the back of the tile so it will not scratch or chip off.
Specs
  • Chip Size: 2x2
  • Color: Cherry Red
  • Material: Glass
  • Finish: Polish
  • Sold By The Sheet
  • Sheet Size: 12" x12"
  • Recommended Grout Color
    This tile does not need to be grouted
    Shaken or Stirred?

    In the 1800's, rum was considered excellent for cleaning hair and keeping it healthy. Brandy was believed to strengthen hair roots

    • Reviews
    • Installation
    Substrate: Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout. Installation: To avoid affecting the color of glass tile, White modified thin-set is recommended for all installations. A second option is regular tile wall glue. Grout joint should be a minimum of 1/16” and not butt set. Apply thin-set using a trowel as recommended by the manufacturer. Apply as much adhesive as can be covered within 10-15 minutes. Once set in place gently tap using a grout float to insure full bedding and a true surface. Grouting: Grout joints should be packed full and free of voids and pits. Clean excess grout as the work progresses before it has hardens completely. Acids should never be used for cleaning grout haze. Use a damp sponge for the final cleaning and to smooth out the grout joints. When grout is completely cured a grout sealer should be applied as recommended by manufacturer. It is recommended to use Non-Sanded Grout. Cutting: Tile can be cut using a wet saw with a diamond “cut-off” blade. Edges can be sanded smooth after cutting.
    This tile does not need to be grouted
    Close

    When you buy 4 or more samples from GlassTileStore.com, we will include a $20 Gift Card with your order!

    • Can be used towards all products or samples on GlassTileStore.com
    • Can be combined with any other coupons
    • Free priority shipping on both your samples and your gift card
    • Gift card is good toward your next purchase and will be shipped together with your samples
      Loading...