Printing tear sheetClick here to close this tab and return to where you were.
Loft Ash Gray Polished 1"x4" Glass Tile
Make your back splash the kitchen's, bathroom, pool or decorated room focal point by using this striking stacked pattern tile. Add some style to your decor! This should give it a more distinct look. These glass tiles will add a durable lasting beauty and value to your bathroom, kitchen, fireplace or pool installation. The color is painted on the back of the tile so it will not scratch or chip off.
If you would like the thinner version of this tile you can go here: Loft Ash Gray Stacked Glass Tiles
- Chip Size
- Sheet Size
- 11 3/4"x 11 3/4"
- 8 mm
- MOHS (Scratch Resistant)
- Shade Variation
- Chemical Resistance
- Water Absorption
- < 0.5%
- Breaking Strength
- > 100 lbs.
Shaken or Stirred?
In English pubs drinks are served in pints and quarts. In old England, bartenders would advise unruly customers to mind their own pints and quarts. It's the origin of "mind your P's and Q's."
Browse 1 question Browse 1 question and 5 answersWhy did you choose this?TileBar StoreWanted something unique for our waterline pool tile. We paired this with the 4x12 in the same color for a contemporary modern pool waterline tile.Camilla M on Jul 26, 2016
Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.INSTALLATION
- To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Grout joint should be a minimum of 1/16” and not butt set.
- The trowel size you can use is a 9" Trowel - 1/16" square notch.
- Grout joints should be packed full and free of voids and pits.
- Clean excess grout as the work progresses before it has hardens completely.
- Acids should never be used for cleaning grout haze.
- Use a damp sponge for the final cleaning and to smooth out the grout joints.
- It is recommended to use non-sanded grout.
The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.