Loft Ash Gray Polished 1x4_MainLoft Ash Gray Polished 1x4_Main
Move your mouse over image or click to enlarge
Loft Ash Gray Polished 1x4_Main Loft Ash Gray Polished 1x4_corner Loft Ash Gray Polished 1x4_bottom_edge Loft Ash Gray Polished 1x4_bottom_closeup Loft Ash Gray Polished 1x4_closeup Loft Ash Gray Polished 1x4_corner_closeup Loft Ash Gray Polished 1x4_Lincoln Properties_Kitchen_Installation
Add To Compare

Add to favorites

Loft Ash Gray Polished 1" X 4" Glass Tiles

Step 1

Try Before You Buy

Step 2

Ready to Order?

Get a Sample

Free Shipping

$2.99 each +Try More!

Mix & Match 5 for $10

Free Shipping

  Price is Per sheet

Our Price: $15.95

You Save: $8.05 (34%)

Design Elements

Loft Ash Gray Polished 1"x4" Glass Tile

Make your back splash the kitchen's, bathroom, pool or decorated room focal point by using this striking stacked pattern tile. Add some style to your decor! This should give it a more distinct look. These glass tiles will add a durable lasting beauty and value to your bathroom, kitchen, fireplace or pool installation. The color is painted on the back of the tile so it will not scratch or chip off.

Specs
  • Chip Size: 1"x4"
  • Color: Gray
  • Material:Glass
  • Finish: Polished
  • Sold By The Sheet
  • Sheet Size: 11 5/8"x 11 5/8"
  • Recommended Grout Color
    This tile does not need to be grouted
    • Reviews
    • Installation
    SUBSTRATE

    Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

    INSTALLATION
    • To avoid affecting the color of glass tile, White modified thin-set is recommended for all installations.
    • Apply as much adhesive as can be covered within 10-15 minutes. 
    • Grout joint should be a minimum of 1/16” and not butt set.
    • The trowel size you can use is a 9" Trowel - 1/16" square notch.
    GROUTING
    • Grout joints should be packed full and free of voids and pits.
    • Clean excess grout as the work progresses before it has hardens completely.
    • Acids should never be used for cleaning grout haze.
    • Use a damp sponge for the final cleaning and to smooth out the grout joints.
    • It is recommended to use non-sanded grout.
    CUTTING

    The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.

    This tile does not need to be grouted
    Close

    When you buy 4 or more samples from GlassTileStore.com, we will include a $20 Gift Card with your order!

    • Can be used towards all products or samples on GlassTileStore.com
    • Can be combined with any other coupons
    • Free priority shipping on both your samples and your gift card
    • Gift card is good toward your next purchase and will be shipped together with your samples
      Loading...