FREE SHIPPING on All Orders. 365 Day Returns.

Choose 5 Samples for $10

Cart (0)

Live Chat Contact Us

LASER CUT 9X18 ZEN GREEN GLASS TILES_MAINLASER CUT 9X18 ZEN GREEN GLASS TILES_MAIN
Move your mouse over image or click to enlarge
LASER CUT 9X18 ZEN GREEN GLASS TILES_1 LASER CUT 9X18 ZEN GREEN GLASS TILES_MAIN LASER CUT 9X18 ZEN GREEN GLASS TILES_2
Add To Compare

Add to favorites

Laser Cut 9x18 Zen Green Glass Tiles

Step 1

Try Before You Buy

Step 2

Ready to Order?

Get a Sample

Free Shipping

$2.99 each +Try More!

Mix & Match 5 for $10

Free Shipping

  Price is per piece

Our Price: $16.75

You Save: $9.25 (36%)

Design Elements
Laser Cut 9x18 Glass Tiles Zen Green This zen green glass can keep any kitchen, bathroom, or any decorated room looking bright, clean and contemporary. These tilese are format kilm fired glass tiles and slight buckling may occur during baking. Not suitable to be installed on the floor!
Specs
  • Chip Size: 9" x 18"
  • Color: Zen Green
  • Material: Glass
  • Finish:Polished
  • Sold By The Piece
  • Sheet Size: 1.125 sq. ft
  • Recommended Grout Color
    This tile does not need to be grouted
    • Reviews
    • Installation
    • Video
    SUBSTRATE

    Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

    INSTALLATION
    • The adhesive that is recommended to use is either Mirror Mastic or a Silicone adhesive. Both are suitable for the installation.
    • Apply adhesive using a trowel as recommended by the manufacturer. 
    • Apply as much adhesive as can be covered within 10-15 minutes. 
    • Grout joint should be a minimum of 1/16” and not butt set.
    • The trowel size you can use is a 9" Trowel - 1/16" square notch.
    GROUTING
    • Grout joints should be packed full and free of voids and pits.
    • Clean excess grout as the work progresses before it has hardens completely.
    • Acids should never be used for cleaning grout haze.
    • Use a damp sponge for the final cleaning and to smooth out the grout joints.
    • It is recommended to use non-sanded grout.
    CUTTING Two ways to cut:
    • Use Painters tape and cut slowly
    • Go to a store that specializes in cutting glass and have them cut the glass by using special Water Jet machine.
    This tile does not need to be grouted
    Close

    When you buy 4 or more samples from GlassTileStore.com, we will include a $20 Gift Card with your order!

    • Can be used towards all products or samples on GlassTileStore.com
    • Can be combined with any other coupons
    • Free priority shipping on both your samples and your gift card
    • Gift card is good toward your next purchase and will be shipped together with your samples
      Loading...