Printing tear sheetClick here to close this tab and return to where you were.
Illusion 3D Brick White Thassos Marble Tile
Add beautiful dimension to your home with this eye popping 3D tile; perfect for use in your kitchen backsplash or feature wall. This distinctive pattern is made of various sized pieces of White Thassos Marble and the 3D brick pattern will add a unique and elegant design to your room.
- Chip Size
- 3D Brick
- Sheet Size
- 12" x12"
- White Thassos
- White Thassos
Shaken or Stirred?
When I read about the evils of drinking, I gave up reading. --Henny Youngman
Browse 3 questions Browse 3 questions and 4 answersDo you have a recommendation for capping edges? The sides and top? It seems tricky since the heights are different.BEST ANSWER: You can always use something like a Schluter Strip or White Thassos marble liner.How thick is it?BEST ANSWER: The high part is 18 mm and the low part is 10 mm.
Substrate: Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout. Installation: To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations. A second option is regular tile wall glue. Grout joint should be a minimum of 1/16” and not butt set. Apply thin-set using a trowel as recommended by the manufacturer. Apply as much adhesive as can be covered within 10-15 minutes. Once set in place gently tap using a grout float to insure full bedding and a true surface. Grouting: No Grout is needed. Cutting: Tile can be cut using a wet saw with a diamond “cut-off” blade. Edges can be sanded smooth after cutting.