Printing tear sheetClick here to close this tab and return to where you were.
FILAPRW200 Grout Release
WHAT IT'S FOR
Seals material against the dirt generated in the grouting process
Simplifies and speeds up post-installation cleaning and treatments, protecting the material against water absorption.
Ideal for absorbent materials such as terracotta, quarry tiles, natural and manufactured stones, and composites.
Does not create a surface film and allows the material to breathe.
It does not change the appearance of the material
HOW IT'S USED
No dilution: ready for use.
Before application, remove any dust from the surface for treatment.
Apply grout release evenly with an airless spray pump - taking care not to leave pools on the surface.
It can also be applied with a brush or a soft applicator.
Apply to the edges of the installed material with special care.
Sold by the container, each container holds 1.06 Quart.
Product will cover approximately 107-215 sq. ft. per quart per coat
- 24 hours after application of FILAPRW200 the floor can be grouted, taking careto remove excess grout filler thoroughly with a sponge before it is completely dry.
- Perform final cleaning and apply the suitable treatment once the floor has cured.
- Must be applied to material at temperature between 50* F and 86*F (10*C and 30*C).
Shaken or Stirred?
The Pilgrims landed at what is now Plymouth, Massachusetts, rather than continue sailing because they were running out of supplies, especially alcohol beverage.
Browse 2 questions Browse 2 questions and 8 answersWhy did you choose this?TileBar StoreNeeded it.John T on Sep 23, 2016Would this be appropriate to use with glass tiles?BEST ANSWER: I am not for sure. I would think it would be okay. It is used to help get the excess grout off of the tile. My contractor said to buy it and it was a suggested item for my tile.