Printing tear sheetClick here to close this tab and return to where you were.
CREMA MARFIL 4 X 12
This minimalist design would make a striking backsplash for your kitchen or bring a modern touch to your fireplace or any other decorated spot in your home. This is a natural material will have a color variation.
Considered to be one of the most popular marbles in the world, Crema Marfil’s timeless beauty opens doors to endless applications. This stone cappuccino colored marble has a tone range of light to medium. Occasionally ribboned throughout the tile are natural calcium veins of soft brown or orangish color and very few signs of fossils.
- 4" x 12"
- Sheet Size
- 3 pieces per sq. ft.
- 1 sq. ft.
- Crema Marfil
- 10 mm
Shaken or Stirred?
President Theodore Roosevelt took more than 500 gallons of beer with him on an African safari.
Browse 3 questions Browse 3 questions and 6 answersDoes tile bar offer a trade discount?Will the crema marfil marble mosaic tile be appropriate in a shower?BEST ANSWER: It would be fine for walls! It is a beautiful tile! The recommendation I have received regarding tile on the floor is to go with a smaller tile so that the surface is not too slick. A smaller tiles and closer together grout lines will be better/safer for the floor. This tile is definitely high gloss and would be very slippery if wet. Also if you put in a shower, make sure to seal it!
Substrate: Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout. Installation: To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations. A second option is regular tile wall glue. Grout joint should be a minimum of 1/16” and not butt set. Apply thin-set using a trowel as recommended by the manufacturer. Apply as much adhesive as can be covered within 10-15 minutes. Once set in place gently tap using a grout float to insure full bedding and a true surface. Grouting: Grout joints should be packed full and free of voids and pits. Clean excess grout as the work progresses before it has hardens completely. Acids should never be used for cleaning grout haze. Use a damp sponge for the final cleaning and to smooth out the grout joints. When grout is completely cured a grout sealer should be applied as recommended by manufacturer. It is recommended to use Non-Sanded Grout. Cutting: Tile can be cut using a wet saw with a diamond “cut-off” blade. Edges can be sanded smooth after cutting.