Printing tear sheetClick here to close this tab and return to where you were.
CREMA MARFIL 3/4 X 4 GLASS TILE BIG BRICK PATTERN
This striking crema marfil gives a high-end, timeless look to any kitchen, bathroom or any decorated room. The mesh backing not only simplifies installation, it also allows the tiles to be separated which adds to their design flexibility. Considered to be one of the most popular marbles in the world, Crema Marfils timeless beauty opens doors to endless applications. This stone cappuccino colored marble has a tone range of light to medium. Occasionally ribboned throughout the tile are natural calcium veins of soft brown or orangish color and very few signs of fossils.
- Chip Size
- Big Brick Pattern
- Sheet Size
- 12" x12"
- Crema Marfil
Shaken or Stirred?
In 1964, the US Congress established federal regulations for Bourbon. Bourbon must be made from a mash (the base mixture of grain and water) that is at least 51 percent corn. The rest of the mash is made up of rye, wheat and/or malted barley. Unlike Scotch or cognac, bourbon must by law be aged in new, charred oak barrels. While most bourbon today is still made in Kentucky, it can legally be made anywhere in the United States.
Browse 1 question Browse 1 question and 2 answersWhy did you choose this?TileBar StoreWe ordered our granite locally but i was looking for a different backsplash than what was in the stores. I really like the look of the variations. Hoping it is as good when it arrives as it looks online.Sharon T on Apr 27, 2016We ordered our granite locally but i was looking for a different backsplash than what was in the stores. I really like the look of the variations. Hoping it is as good when it arrives as it looks online.Sharon T on Apr 27, 2016
Substrate: Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout. Installation: To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations. A second option is regular tile wall glue. Grout joint should be a minimum of 1/16” and not butt set. Apply thin-set using a trowel as recommended by the manufacturer. Apply as much adhesive as can be covered within 10-15 minutes. Once set in place gently tap using a grout float to insure full bedding and a true surface. Grouting: Grout joints should be packed full and free of voids and pits. Clean excess grout as the work progresses before it has hardens completely. Acids should never be used for cleaning grout haze. Use a damp sponge for the final cleaning and to smooth out the grout joints. When grout is completely cured a grout sealer should be applied as recommended by manufacturer. It is recommended to use Non-Sanded Grout. Cutting: Tile can be cut using a wet saw with a diamond “cut-off” blade. Edges can be sanded smooth after cutting.