Printing tear sheetClick here to close this tab and return to where you were.
Inspired by rural countrysides, the Copse Collection allows you to attain the look and character of aged, weathered wood while also enjoying the durability and ease of maintenance that porcelain tile brings. Capturing the essence of reclaimed wood and available in 5 versatile colorways, Copse gives homeowners and interior designers alike a multitude of rich options in curating a cozy, naturally welcoming space.
Please note that due to the printing technique used for this collection shade variation from piece to piece is to be expected.
- 4" x 24"
- 0.65 sq. ft.
- 10 mm
- Residential Use
- Floor & Wall
- Commercial Use
- Floor & Wall
- Country of Origin
- Shade Variation
- Frost Resistance
- Chemical Resistance
- Water Absorption
- ≤ 0.5%
- DCOF Rating Wet (slip resistance)
- ≥ 0.40
- Breaking Strength
- 450 lbs
- Pieces Per Box
- Sq Ft Per Box
Shaken or Stirred?Most vegetable and almost all fruits contain a small amount of alcohol in them.
Browse 1 question Browse 1 question and 1 answerwhat is the cleaning maintenance?BEST ANSWER: For normal care and maintenance of porcelain tiles, clean porcelain surfaces with a few drops of neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Use a clean soft cloth for best results. Too much cleaner or soap may leave a film and cause streaks. Do not use products that contain lemon, vinegar, or other acids. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Do not use any abrasive cleaners.
Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.
- To avoid affecting the color of the tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Grout joint should be a minimum of 1/16” and not butt set.
- The trowel size you can use is a 9" Trowel - 1/16" square notch.
- Grout joints should be packed full and free of voids and pits.
- Clean excess grout as the work progresses before it has hardens completely.
- Acids should never be used for cleaning grout haze.
- Use a damp sponge for the final cleaning and to smooth out the grout joints.
- It is recommended to use non-sanded grout.
- It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as our MP90
- Highly recommended to purchase the Glass & Stone Installation/Maintenance Kit - http://www.TileBar.com/collection/tiling-supplies/glass-stone-tile-maintenance-package.html
The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.