Printing tear sheetClick here to close this tab and return to where you were.
Tao Cinnabar Glass Tile
This striking blend of shades of beige, lavender, and coffee glass in frosted and polished finishes creates a sleek and attractive design to any room. The mesh backing not only simplifies installation, it also allows the tiles to be separated which adds to their design flexibility. These glass tiles will give a luminescent quality to any bathroom, kitchen or pool installation.
- 0.96 sq. ft.
- Shades of Beige + Lavendar
- Chip Size
- ½” x Random
- Sheet Size
- 11 ¾” x 11 ¾”
- Polished + Frosted
- 8 mm
Shaken or Stirred?
A key reason for such robust sales of Irish whiskey is its signature smoothness and sweetness, which makes it incredibly easy to drink. This unique flavor profile is due to two major factors: The whiskey is usually distilled three times, and the barley is rarely dried over burning peat. (Most Scotch is distilled twice and the malt is often peated, giving a smoky flavor.)
Browse 1 question Browse 1 question and 2 answersWhy did you choose this?TileBar StoreThe colors blend in perfect with my granite counter tops, wood floors, white cabinets and open floor plan dÃ©cor.G A on Apr 3, 2016The colors blend in perfect with my granite counter tops, wood floors, white cabinets and open floor plan dÃ©cor.G A on Apr 3, 2016
Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.INSTALLATION
- To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations.
- Apply thin-set using a trowel as recommended by the manufacturer.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Grout joint should be a minimum of 1/16” and not butt set.
- The trowel size you can use is a 9" Trowel - 1/16" square notch.
- Grout joints should be packed full and free of voids and pits.
- Clean excess grout as the work progresses before it has hardens completely.
- Acids should never be used for cleaning grout haze.
- Use a damp sponge for the final cleaning and to smooth out the grout joints.
- It is recommended to use non-sanded grout.
The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.