Printing tear sheetClick here to close this tab and return to where you were.
Cassie Chapman Eva Marble and Pearl Arabesque Tile
Create the world you want to live in. This elegant combination of Asian Statuary and Pearl is composed in an Arabesque inspired pattern to effortlessly bring a look of understated class with just a hint of glamour into your home. Elegant and alluring, inspire your senses and enhance your ambiance with the dazzling Eva selection from our brand new Cassie Chapman Collection.
- Chip Size
- Sheet Size
- 13 4/5" x 13 4/5"
- 1.32 Sq. Ft.
- Asian Statuary + Light Brown
- Marble + Pearl
- 10 mm
Shaken or Stirred?
Most people think that drinking alcohol raises the body temperature. Alcohol actually lowers the body temperature
Browse 14 questions Browse 14 questions and 22 answersWhy did you choose this?TileBar StoreThis was a fabulous match to an existing marble kitchen for the back-splash. It had just the right amount of color to set off the area.Julia P on Feb 7, 2017Because it will make a beautiful backsplash and update my kitchen!Cheryl S on May 17, 2016This was a fabulous match to an existing marble kitchen for the back-splash. It had just the right amount of color to set off the area.Julia P on Feb 7, 2017I want to use as backsplash behind the oven and then just the plain color without the pearl. Can you tell me if you just have the plain tile that will go with this and fit?Can this tile be used on a fireplace surround?BEST ANSWER: I'm sure it could work. I used it on a master bath wall and in the shower and it's really gorgeous!Can you use this in a shower?BEST ANSWER: The tile can be used in a shower wall, but is not recommended for the floor or anywhere it will be submerged in water. Be sure to seal the marble and grout well.Would this work with Carrera marble or is the pearl too brown?BEST ANSWER: Yes, it matches perfectly with the Asian Statuary, and it's what i used, but I didn't really know the difference between it and Carrera - they look very similar...I need more than 40, and it appear that you only have 21 left, Are you planning on a pre-order or re-stock?BEST ANSWER: Yes we are.Are this tile still on schedule for June 2015?, Would be possible to do a pre-order?BEST ANSWER: Yes these tiles should be coming in any day now. You can give us a call at 888-541-3840 and place an order for them, and as soon as they're checked in to our warehouse your order will ship.When will this be available? Is it possible to order a sample?BEST ANSWER: This tile will be back in stock in early June 2015 and will be available to be sampled at that time.There are 2 questions below asking about using this tile for a floor (not a shower floor) and one answer said no and another one said yes you can....which is it?BEST ANSWER: My concern with using it on the floor is that it would be slippery when your shoe is wet and although the tile is heavy duty, I would be worried that over time cleaning agents would affect the veneer. It is an extremely beautiful tile, and it is fabulous quality. We have gotten so many compliments on our fireplace which we used this tile as the surround. Absolutely beautiful.Hi, Does the color go well with Calacatt gold subway tiles? Does it have warm tone to it to match?BEST ANSWER: I used this in my master bath that has travertine counters and tub deck to try to take the "Tuscan" look away and update with a cleaner, lighter look. It worked great and brings in the creamy tones to tie it together. I used as an accent in the shower too with carrara and it is the glue that ties them all together.Can i use this as floor tile?BEST ANSWER: I would not recommend using this as floor tile. While mother of pearl is water resistant, it is extremely fragile and will NOT hold up to foot traffic. This is decorative tile. I used it as a fireplace surround. Bathroom walls and backsplashes would be fine, but be careful of the cleaning products you use on it.Hi,
When will this tile be back in stock?
Thank you.BEST ANSWER: Click on the "notify me" button on the product page to be notified when it becomes availableCan this tile be used on the floor (not shower) in a bathroom?BEST ANSWER: Yes this tile is suitable for use as a floor.need 42 tiles when will it b back?
These instructions are meant to be a guide for most installations, under normal conditions. Please follow best practice instructions found in the Tile Council of North America (TCNA) 09300 Handbook for specific installation types.
Due to the natural of the material no two pieces of natural stone are exactly alike. Natural stones are products of nature; therefore, variations in color, pattern, texture, and veining will occur. Verify all products before installation for any damage or defects such as chipped edges, broken pieces. No adjustment will be made after installation.
*Always use appropriate personal protective safety equipment when handling, drilling, cutting or grinding glass tile such as (but not limited to) eye, ear and hand protection.
Before you start tiling, make sure that whatever surface the tiles are being installed to will be strong and structurally sound. Cement board, concrete or drywall is best, as these surfaces can handle the moisture of the tiling process. Plywood should be avoided, since the wood will warp with the added moisture and it will also be less waterproof, even after tiling.
When setting tiles we recommend the use of polymer or latex modified thin set or medium bed mortar compliant with ANSI standard A118.4 and is recommended for use with marble tile.
3/16” or 1/4” square notch trowel should be used when installing our glass material and ridges should be smoothed down with the flat side of the trowel prior to fixing the tiles in the mortar bed.
Use a wet-saw with a new, continuous rim diamond blade specifically designed for cutting marble. Do not use “turbo” or other notched blades designed for use with porcelain or ceramic as the teeth can cause a coarse cut, resulting in a heavily chipped edge.
Cut edges and corners will be sharp. Always be sure to smooth the cut edges manually with 200-grit wet/dry sandpaper.
If possible, drill holes before installing tile. Drilling from both sides can ensure a cleaner finish if the hole will be visible after installation. Using a new diamond coring bit (for large holes) or spade bit (for small holes) with a diamond tip made for glass drilling will give the best results. Lubricating the bit and tile surface with a continuous spray of oil/water mix will prolong the life of bits and provide a better-finished edge. When possible, the use of a jig will ensure precise placement of holes to be drilled.
When drilling holes for anchoring bolts, plumbing or any other dissimilar material always ensure a minimum of 1/8” clearance around the item is provided to avoid cracking due to disparate expansion and contraction rates or stress transfer.
We recommend applying grout release prior to grouting, suitable for the respective stone and interior or exterior use, to the tile to facilitate cleaning and for protection against staining from contrasting color grouts. Grout joints should be packed full and free of all voids and pits. Excess grout should be cleaned from the stone surface as the work progresses, before the grout hardens. Do not use acids to clean off excess grout. Prior to grouting, test an area to make sure the stone surface will not scratch.
After the stone is installed, and grouted, seal the stone with an appropriate high quality breathable stone sealer, to minimize water absorption, efflorescence, and potential staining. If necessary, a color enhancer may be applied to bring out the true color of the stone at any time after grouting. Follow sealer manufacturer’s installation instructions. Reseal tile when the stone gets darker or as needed.
CARE AND MAINTENANCE
For normal care and maintenance of stone tiles, clean stone surfaces with a few drops of neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Use a clean soft cloth for best results. Too much cleaner or soap may leave a film and cause streaks. Do not use products that contain lemon, vinegar, or other acids on marble or limestone. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Do not use any abrasive cleaners.