Printing tear sheetClick here to close this tab and return to where you were.
Athen Gray 2" Hexagon Marble Tile
These beautiful stone mosaics, each piece fits into the next like a perfect puzzle. Its stunning design and unique pattern of hexagon shaped athen grey tiles in a polished finish. The stones will bring warmth and a natural feeling to your bathroom, kitchen, and any other decorated spot in your home.
- Chip Size
- Sheet Size
- 11.75" x 11.75"
- .96 sq. ft.
- Athen Grey
- 10 mm
- Residential Use
- Floor & Wall
- Commercial Use
- Wall only
Shaken or Stirred?
In Japan, beer is sold in vending machines, by street vendors and in the train stations.
Browse 4 questions Browse 4 questions and 4 answersCan this come in a honed finish or only polished?BEST ANSWER: Only the sqaures come in honed. Unless you'd like the Lady Gray.Is There a border tile for this?how many tiles come with a sample?BEST ANSWER: 6does this come in stainless steel?BEST ANSWER: We currently do not carry a hexagonal stainless steel tile.
Substrate: Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout. Installation: To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations. A second option is regular tile wall glue. Grout joint should be a minimum of 1/16” and not butt set. Apply thin-set using a trowel as recommended by the manufacturer. Apply as much adhesive as can be covered within 10-15 minutes. Once set in place gently tap using a grout float to insure full bedding and a true surface. Grouting: Grout joints should be packed full and free of voids and pits. Clean excess grout as the work progresses before it has hardens completely. Acids should never be used for cleaning grout haze. Use a damp sponge for the final cleaning and to smooth out the grout joints. When grout is completely cured a grout sealer should be applied as recommended by manufacturer. It is recommended to use Non-Sanded Grout. Cutting: Tile can be cut using a wet saw with a diamond “cut-off” blade. Edges can be sanded smooth after cutting.