Printing tear sheetClick here to close this tab and return to where you were.
Arbor White Carrara With Black Dot Marble Tile
This hard-working tile will dress up your home while its clean, bright look of marble has inherent elegance and timelessness. Use it as an accent on an otherwise plain wall or cut it up and design your own look.
The mesh backing not only simplifies installation, it also allows the tiles to be separated which adds to their design flexibility. The natural material will have a color variatio>.
- Chip Size
- 3"-1/5"x2"-1/5", 1/2"x1/2"
- Sheet Size
- White Carrera + Black
- White Carrara + Black
- 10 mm
- Residential Use
- Floor & Wall
- Commercial Use
- Wall only
Shaken or Stirred?
The strongest beer in the world comes from a German brewer named Georg Tscheuschner. He claims his Schorschbrau Schorsch Bock 43 is 43% ABV which is stronger than most distilled spirits. It sells for over 100 Euros per bottle and it most likely is also the most disgusting tasting beer on the planet.
Browse 2 questions Browse 2 questions and 4 answersWhere is this tile manufactured?BEST ANSWER: The tile is manufactured in China
Tile must be installed over a suitable substrate to insure a proper installation. Glass tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer’s recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Glass is reflective therefore any inconsistencies in the substrate will result in a poor installation. For pools and fountains we recommend installing a mortar bed according to TCA P601-98. EXPANSION AND CONTROL JOINTS PER TCA EJ171-05 Expansion joints should be installed at all “changes in plane” in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.INSTALLATION
- To avoid affecting the color of glass tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations.
- Apply thin-set using a trowel as recommended by the manufacturer.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Once you adhere tile to the wall, you would first apply the grout release before grouting.
- Once Fila MP/90
The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass and stone. Edges can be sanded smooth after cutting.