Alloy Sutjeska_Main
Move your mouse over image or click to enlarge
Alloy Sutjeska_Main Alloy Sutjeska_Main Alloy Sutjeska_closeup Alloy Sutjeska_corner_closeup Alloy Sutjeska_bottom_closeup Alloy Sutjeska_corner Alloy Sutjeska_bottom_edge Alloy Sutjeska_4 Alloy Sutjeska_3 Alloy Sutjeska_2 Alloy Sutjeska_1
Add To Compare

Add to favorites

Alloy Sutjeska 1/2 X Random Glass And Marble Tiles

Step 1

Try Before You Buy

Step 2

Ready to Order?

Get a Sample

Free Shipping

$2.99 each +Try More!

Mix & Match 5 for $10

Free Shipping

  Price is per Sheet

Our Price: $16.50

You Save: $4.50 (21%)

Design Elements

Alloy Sutjeska 1/2"xRandom Glass and Stone Tile

This beautiful stone mosaic blend of this polished and frosted in white with gray and light brown marble leaves the room contemporary yet traditional. The color is painted on the back of the tile so it will not scratch or chip the color off. The mesh backing not only simplifies installation, it also allows the tiles to be separated which adds to their design flexibility.

Specs
  • Chip Size: 1/2"xRandom
  • Color: White, Gray + Light Brown
  • Material: Glass + Stone
  • Finish: Polished + Frosted
  • Sold By The Sheet
  • Sheet Size: 12"x13"
  • Recommended Grout Color
    This tile does not need to be grouted
    Shaken or Stirred?

    In English pubs drinks are served in pints and quarts. In old England, bartenders would advise unruly customers to mind their own pints and quarts. It's the origin of "mind your P's and Q's."

    • Reviews
    • Installation
    • Video

    SUBSTRATE

    Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. Tile must be sealed.

    INSTALLATION
    • To avoid affecting the color of the tile, White modified thin-set is recommended for all installations.
    • Apply as much adhesive as can be covered within 10-15 minutes. 
    • Grout joint should be a minimum of 1/16” and not butt set.
    • The trowel size you can use is a 9" Trowel - 1/16" square notch.
    GROUTING
    • Use Non-Sanded grout
    • Grout joints should be packed full and free of voids and pits.
    • Clean excess grout as the work progresses before it has hardens completely.
    • Acids should never be used for cleaning grout haze.
    • Use a damp sponge for the final cleaning and to smooth out the grout joints.
    • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as our MP90
    • Highly recommended to purchase the Glass & Stone Installation/Maintenance Kit - http://www.TileBar.com/collection/tiling-supplies/glass-stone-tile-maintenance-package.html
    CUTTING

    The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.

    This tile does not need to be grouted
    Close

    When you buy 4 or more samples from GlassTileStore.com, we will include a $20 Gift Card with your order!

    • Can be used towards all products or samples on GlassTileStore.com
    • Can be combined with any other coupons
    • Free priority shipping on both your samples and your gift card
    • Gift card is good toward your next purchase and will be shipped together with your samples
      Loading...