Printing tear sheetClick here to close this tab and return to where you were.
Alloy Canyon Blend 1/2 x Random Glass and Stone Tile
This striking blend of polished glass in shades of golden brown in wood onyx and noche travertine, with the golden marble gives a luminescent quality to any bathroom, kitchen, or pool installation. The blending of the golden marble with the shades of golden brown will provide a rustic and tradtional ambiance, but this pattern can still make a room look modern.
- Chip Size
- Sheet Size
- Shades of Brown, Wood Onyx + Noche Travertine
- Glass + Stone
- 8 mm
- Residential Use
- Wall Only
- Commercial Use
- Wall only
Shaken or Stirred?
President Lincoln, when informed that General Grant drank whiskey while leading his troops, reportedly replied "Find out the name of the brand so I can give it to my other generals."
Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. Tile must be sealed.INSTALLATION
- To avoid affecting the color of the tile, White modified thin-set such as Bostik Glass Mate is highly is recommended for all installations.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Grout joint should be a minimum of 1/16” and not butt set.
- The trowel size you can use is a 9" Trowel - 1/16" square notch.
- Use Non-Sanded grout
- Grout joints should be packed full and free of voids and pits.
- Clean excess grout as the work progresses before it has hardens completely.
- Acids should never be used for cleaning grout haze.
- Use a damp sponge for the final cleaning and to smooth out the grout joints.
- It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as our MP90
- Highly recommended to purchase the Glass & Stone Installation/Maintenance Kit - http://www.TileBar.com/collection/tiling-supplies/glass-stone-tile-maintenance-package.html
The recommended cutting method is to use a wet saw with a diamond blade that is specifically for cutting glass. Edges can be sanded smooth after cutting.